Help Modelling Waffer cookie
Moderatori: Arkimed, natas, visualtricks, cappellaiomatto
-
- Advertising
Help Modelling Waffer cookie
I am trying to modelling a Waffer cookie but i can´t get a good result.
I also tried to use vray displacement material, but if i use this, i get up, down and side deformations which is not what i was looking for...if i only could get upper deformation it would be great.
And finally i tried to use a plane material with many polygons, select them and use bevel, then i used select invert and extrude them, but the result was square form and not triangle.
Thanks in advance for any help!.
I really appreciate.
- Allegati
-
- waffer.jpg (36.5 KiB) Visto 2044 volte
- masterzone
- Site Admin
- Messaggi: 10361
- Iscritto il: ven set 17, 2004 5:34 pm
- Località: Verona
Re: Help Modelling Waffer cookie
You should be able to get this kind of material by using the displacer deformer (blue icons on the tool bar) by apply it on a plane object with many segments.
This kind of way could be help you because when the results is good you can "current state to object" and convert it into a poly object, than you can estrude down all poligons and make it solid before the chocolate cream...
When you try to extrude all, go into the poly tool and move tool and select all polygons with (ctrl + a) and drag down the Y axis with CTRL pressed, don't use the extrude tools because you have curved poly and errors could be occurs..
alex
ps: the sculpt should be another good way but you need a little bit experience with it
Re: Help Modelling Waffer cookie
Thanks so much Alex, as always.
This is what i get, now do i have to select the lower vertex and pull them down to get more shape?.
- masterzone
- Site Admin
- Messaggi: 10361
- Iscritto il: ven set 17, 2004 5:34 pm
- Località: Verona
Re: Help Modelling Waffer cookie
Cinema4D will extrude them into mono direction...it's a tips for modeling
Re: Help Modelling Waffer cookie
1- select all polygons ( Not vertex ) CMD A
2- press CTRL and pull down Y Axis.
When i did this, it pull down all the shape as one.
Maybe i am doing something wrong.
- masterzone
- Site Admin
- Messaggi: 10361
- Iscritto il: ven set 17, 2004 5:34 pm
- Località: Verona
Re: Help Modelling Waffer cookie
Re: Help Modelling Waffer cookie
- masterzone
- Site Admin
- Messaggi: 10361
- Iscritto il: ven set 17, 2004 5:34 pm
- Località: Verona
Re: Help Modelling Waffer cookie
Alex
Re: Help Modelling Waffer cookie
Can i ask you if there is a way to get this ¨ Crush ¨ against waffle cookie chocolate effect?.
- Allegati
-
- aplastado.jpg (51.66 KiB) Visto 2030 volte
- masterzone
- Site Admin
- Messaggi: 10361
- Iscritto il: ven set 17, 2004 5:34 pm
- Località: Verona
Re: Help Modelling Waffer cookie
Could you attach a picture about the actual results of your mesh? near the border?
- Allegati
-
- aplastado.jpg (51.79 KiB) Visto 2028 volte
-
- Advertising
FOLLOW US