geometry problem

Forum for: Modelling, Texturing, Animation, Composting and the whole general usage of Cinema4D.

Moderators: natas, Arkimed, visualtricks, cappellaiomatto

Post Reply
  • Advertising
doriang
Posts: 3
Joined: Fri Mar 01, 2019 8:14 pm

geometry problem

Post by doriang »

Hi everyone.
I received an obj from a friend but this has a problem:
all the faces seem to be separate, so when I insert a subdivision surface I have a problem (as you can see in the attached images).
Does anyone know a solution for this?
Attachments
screen 2.PNG
screen 2.PNG (146.17 KiB) Viewed 392 times
screen 1.PNG
screen 1.PNG (110.34 KiB) Viewed 392 times

MarkoDer
Posts: 160
Joined: Wed Sep 19, 2018 2:01 pm

Re: geometry problem

Post by MarkoDer »

Go in edge mode and use the dissolve tool in order to create all quadrangle, the triangles must be avoided, after that use the optimize tool
Attachments
dissolv.jpg
dissolv.jpg (158.59 KiB) Viewed 385 times

doriang
Posts: 3
Joined: Fri Mar 01, 2019 8:14 pm

Re: geometry problem

Post by doriang »

Thank you so much. I had also arrived at this solution, trying everything.
Thanks again.

doriang
Posts: 3
Joined: Fri Mar 01, 2019 8:14 pm

Re: geometry problem

Post by doriang »

but instead of "dissolve" I use "melt" seems to work better .. I do not know why

  • Advertising
Post Reply