Spline Wrapper 3.0

Forum for: Questions about C4Dzone plugins. Post here questions or technical support.

Moderators: natas, Arkimed, visualtricks, cappellaiomatto

Post Reply
  • Advertising
alletsator
Posts: 2
Joined: Sat Jan 04, 2014 1:39 am

Spline Wrapper 3.0

Post by alletsator »

Hi. I have a question.
I like to use Spline Wrapper 3.0 im may topological meshes, with Sweep and a circle.
I upload an manual example.
gK_VD_p90B_0080.png
gK_VD_p90B_0080.png (794.12 KiB) Viewed 309 times

User avatar
cappellaiomatto
Moderatore
Posts: 1527
Joined: Mon May 07, 2012 5:12 pm

Re: Spline Wrapper 3.0

Post by cappellaiomatto »

Hi
I think the plugin cannot do it.....there is an option to use a back bone spline which can be useful to follow the profile of the mesh like in this case but the problem is that the mesh overlap itself..... I'm pretty sure that the plugin cannot do a good job because it cannot understand which side of the mesh need to be covered.

You can try and then later adjust the result exploding the spline wrapper but it's not one click job pfiu
Attachments
1.jpg
1.jpg (94.77 KiB) Viewed 302 times

alletsator
Posts: 2
Joined: Sat Jan 04, 2014 1:39 am

Re: Spline Wrapper 3.0

Post by alletsator »

Thank you very much for your detailed response Cappellaiomatto.
Indeed, the Spline there in the Klein bottle was handcrafted.
I was in a hurry and if I worked longer on it manually it would be perfect.
Best regards

  • Advertising
Post Reply